If you own a golf cart, then wrapping it must be exciting for you. People often want to make their golf carts stand out or make them more their own. Wraps for golf carts are a cheap alternative to painting, and they let you put graphics on your vehicle in almost any way you want. Thats why you need to know how to wrap a golf cart in an effective way.
You can get a custom look with a kit that has already been cut, or you can buy solid-color or graphic-design vinyl and cut it to fit your needs. Wrapping golf carts could make them look and act very different overnight. But how can you give your golf cart this unique look and make it stand out? Here are the process of wrapping a golf cart.
How to Wrap a Golf Cart?
We have shared step-by-step guidelines for wrapping a golf cart. You will need these tools listed below to cover a golf cart.
Tools you will need
- Paper towels
- 70% Rubbing Alcohol and Simple Green Degreaser (or equivalent)
- (Optional)3M Brand Adhesive Promoter Pad (Optional, but is handy for applying in nooks and crannies)
- Masking Tape
- Cotton Application Gloves
- Heat guns
- Snap Blade Knife
- Squeegee Tool
- (Optional) Knifeless tape
Preparing the Cart for Wrapping
First, remove all the hardware, lights, lenses, and other cart parts that could get in the way. Take off the windshield and the top, and get as much as possible off the golf cart that doesn’t need to be wrapped.
Sand down any rough spots or gouges in the vehicle’s original finish. Try to get the surface as close to level as possible, keeping in mind that bumps or dimples will be visible in the end product.
Steps to Wrap the Golf Cart
We have shared a step-by-step wrap application method for golf cart for you all.
Step 1: Start with the back of the cab, which is usually the flattest part of the vehicle. It is where you keep your legs when you’re driving. It is usually the most accessible place to cover, and you will quickly get used to how the vinyl feels when you stretch it.
Step 2: Use a small piece of masking tape to mark the middle. If you want to use a large roll of vinyl, measure the area you want to cover and cut the vinyl bigger than you need. Always cut about 20% more material than you think you’ll need. You can trim the extra wrap easily after the film is on. It is better to have a little bit more vinyl than not enough.
Step 3: Test where the vinyl will go, and then use the masking tape to make a mark that will line up with the pattern on the body. Once you are happy with the position, tear a strip of paper from the middle of the panel paper backing.
Once you’ve lined up the pencil mark, use this exposed part of the vinyl to make the first connection to the surface. The glue won’t stick until you press on it, so this is your chance to get it exactly where you want it.
Step 4: While you and your partner pull the vinyl away from each other, peel off the backing paper and smooth the vinyl onto the surface. Use the felt-covered squeegee or your cotton-gloved hand to smooth out the bubbles in the film as you heat it with the heat gun and move toward the edges.
If you are not using a hair dryer but a heat gun, be careful about how close you get to the film. A heat gun gets much hotter than a hair dryer does.
Step 5: Anywhere that sticks out, like a key switch or the shaft of the reverse/forward knob, use the razor knife to cut a relief slit big enough to let the film over it. You can come back later and trim this correctly with the knife and squeegee to make it fit tightly around the hole or protrusion.
Use the heat gun to warm up the surface and make the glue work while you smooth and turn corners. Make a slit in the film at the top of each corner on the surface, trim it, and fold the rest over. Use the heat gun to seal it, then do the same on the other side. Check your work after you have tucked in all the edges.
Step 6: When you’re happy with how it looks, heat the area again to set the glue and release any tension that’s still there. If you made a mistake when you wrapped the edge, it would show up now.
If a corner curl or a wrinkle shows up, you will need to work on this area again. Once you like how the space looks, you can move on to other parts of the golf cart. Your level of skill with the squeegee will have a significant impact on how well you do. On a flat surface, you might move it from top to bottom to eliminate all the bubbles and creases.
Step 7: Use an arced sweep of the squeegee over a round or curved surface to avoid “bottle-capping” or small groups of wrinkles. Again, please don’t throw away any scraps because you might need them later for a patch or a small part.
When you can’t avoid a seam, overlap it and use a knife or knifeless tape to make a clean cut so the edges can fit together tightly.
Use Duraglas or Bondo Glass Filler to fill holes, and then sand them smooth. Follow the directions for the product you want to use.
Benefits of Wrapping A Golf Cart
A good quality golf cart cover has too many advantages over golf cart painting. These include:
Golf cart coverings are a cost-effective alternative to painting. Painting your golf cart will be expensive compared to vinyl wraps, which cost a third as much. Vinyl wrap offers long-term value and low upfront costs. Wrapping is a cost-effective alternative if you own numerous carts.
Painting a golf cart takes more time than coating it with vinyl. Who would not love Time-saving options? We know time equals money.
Painting a golf cart requires a well-ventilated area, a safety mask, and other equipment. Vinyl wrapping requires no equipment or facilities. You can easily install vinyl wrap in your garage or driveway.
Even if you plan complete wrapping, it won’t slow you down or require extra equipment. It will just take extreme time.
Unique selling point
It may help you sell your golf cart in the future. Potential purchasers have more options when buying a cart with its original paint job, but your vinyl cover could attract them and boost your worth. Your golf cart gets UV protection.
Painting releases poisons and harms animals. Non-toxic golf cart vinyl wraps are better in this case. Vinyl wraps are safer for you, others, and the environment because they contain no acids or chemicals. Warm water and soap are all you need to clean your golf cart.
Vinyl covers offer more alternatives than paint and can be removed. You do not need to seek any professional help.
Long-lasting and durable
Durability is essential when deciding between paint and vinyl. Wraps stay longer, offer better protection, and require less care. The wraps protect your golf cart from harsh weather. Vinyl wraps are abrasion- and UV-resistant.
Gives great coverage
Many individuals repaint their golf carts to hide dents or scrapes. Vinyl coverings allow you to avoid repainting your golf cart. A vinyl wrap can conceal the damage if you don’t want to change your golf cart’s aesthetic look.
Vinyl coverings have different colors and styles. You can choose from several choices—metallic, glossy, matte, and satin chrome wraps.
FAQs – How to Wrap a Golf Cart
How much will it cost me to wrap a golf cart?
Golf cart coverings cost ranges from $150 to $350. Size and design affect the cost of covering your cart. Choose economical choices like Vinyl Frog to wrap your golf cart and still get the needed protection.
Is it possible to paint a plastic golf cart?
Yes, you can paint a plastic golf cart. Just follow the necessary instructions.
How hard is it to wrap a golf cart?
No, it is not hard at all. It is much easier than painting a golf cart. You will only need a few instruments and one or two helping hands.
How long does a golf cart last?
If not exposed to extreme weather, a car wrap will last longer. Properly maintained automobile wraps can last seven years.
Vinyl Frog offers cheap, easy-to-apply golf cart vinyl coverings. Their sheets can transform an ordinary golf cart. Besides their cost-effective and fashionable alternatives are excellent for painting your golf cart.
That is the end of the post. I hope that I have successfully guided you on how to wrap your golf cart. Once the wrap is removed, use Goo Gone or some other citrus-based chemical to dissolve and remove excess adhesive from the golf cart body.
Always remember that your golf cart wrap will last longer if you take care of it properly.