How To Correct A Slice With A Driver | All The Steps Explained

Most of the beginners as well as some experienced golfers do experience problems with their slice. But it is not very tough to correct the slice. Anyone who wants to become a pro-level golfer needs to have deeper knowledge about correcting a slice. In this case, a better thing to do is to study how to correct a slice with a driver.

Try to not aiming left, paying closer attention to your divots, accurate & perfect ball position, elbow trucked, fixing the grip, transferring your weight, and, most importantly, focusing on the release – these are all the advice I used to get for fixing my slices.

All of the above information or advice are relevant and to-the-point. But for fixing a slice, it is a must to have a clear idea about how to implement the above-mentioned slice fixes.

To be honest, how to fix a slice with a driver is not difficult. All you need is time and proper practice. Also, you need to have the appropriate tools and knowledge for fixing a slice.

In my early days of golfing (when I was a young golfer), I experienced tremendous problems with my slice. And, trust me, it used to irritate me a lot.

I did all that I could do to correct my slice. For example, I would make the swing a bit harder, closing the clubface, trying harder, aiming way left, along with many other things. Yes, I tried these but ended up having no positive outcome.

To be honest, this problem with my slice took all my confidence away. And, I found that it was seriously affecting my scores. So, all that I tried to fix my slice made me even more frustrated.

However, I didn’t give up. I consulted with the skilled and pro-level golfers and followed their instructions. Also, I did my own research to come up with the most effective ways regarding fixing a slice with a driver.

And when I finally became able to fix my slice, I sensed a feeling of relief.

I found out that all that helped me to correct my slice was accurate and reliable information, a bit of practice and time.

To help you out in this regard, I will share all the necessary steps that I followed to correct my slice a driver. If you follow my guidelines, you will be able to correct your slice within no time at all. But, remember that you have to practice the drills and keep patience.

What Is A Slice?

For beginner golfer, it is essential to know what a slice is in the first place. Well, a slice is just like a golf shot where the shot makes a significant curve in flight from the left direction to the right.

Although one may hit a slice intentionally on some occasions, it is mainly because of the result of a serious level of swing flaw.

Why Do You Slice?

There can be different reasons why you experience a slice while playing a golf shot. So, it is important to know which one is applicable to your case. Some golfers may face only one of the many swing flaws, but many golfers may display multiple signs or reasons.

Before I tell you the causes of a slice, I must let you know about the definitions of some important terminology:

  • Target Line

It is basically an imaginary line starting directly a few feet behind your golf ball to your intended target, for example, the flagstick.

  • Swing Path

This is known as the specific direction the golf clubhead moves at an impact and is measured in relation to the intended target. Typically, golfers describe a swing path as being “in-to-out” or “out-to-in”.

  • Closed or Open Clubface

An open clubface is the one where the line of the clubface aims at the right of the target line, imparting left-to-right spin slicing to the golf ball.

A closed clubface is the one where the line of the clubface aims at the left of the target line, imparting right-to-left hook-spin to the golf ball.

What Does Cause A Slice?

If I put it simply, the basic reason that causes a tee shot curving from the left-to-right direction is the clubface that is open to a great extent in proportion to the swing. While playing a shot, if your swing is on the right of the target, left of the target, or even completely straight down your target line, an open clubhead will pass on the left-to-right spin, leading to a slice at the end.

These are the possible events that can cause a slice –

  • Possibly a weak grip.
  • Too tight grip pressure.
  • Out-to-in swing path.
  • Shoulders left-aligned.
  • Adjustment of equipment.

How to Correct A Slice With A Driver – Step By Step Procedure

How To Correct A Slice With A Driver
How To Correct A Slice With A Driver

Since I will be using some specific tools for this procedure to correct a slice with a driver, I would recommend you to manage the same tools before you proceed.

Here is a list of the required tools:

  • A Driving Range.
  • Drivers.
  • Golf balls.
  • Tees.
  • Small and Soft Golf Towel.

Step 1 – Managing The Right Equipment

Let me tell you the fact that a slice, sometimes, is not a golfer’s fault! That would be really great if this were the case for every golfer out there, right?

Well, we all know that playing golf is as tough as it is.

It would be astounding if you could use your golf club following the correct launch, and the slice is just disappeared.

Unfortunately, the truth is it’s not simple. But you need to make sure that you have to select the right equipment.

  • Loft means forgiveness.
  • If you are really having issues with a slice, I would suggest you choose a minimum of 10.5-degrees of the loft.
  • It is also essential to select the right flex on the Driver. If you are planning to hit your golf ball more than 160 yards, it is better to use a Stiff Flex.
  • If you use a flex that’s too stiff, it will become hard to make the release. And, the result is more slice.
  • Be very careful while using any old golf equipment. Technology is working very hard to eliminate the slice issue. So, anything that is like ten years old, you shouldn’t use that.
  • Drivers that are more offset can possibly help to correct a slice.
  • Drivers that come with an adjustment feature can adjust the clubface moderately closed and play a significant role in fixing the slice issue.
  • Never believe the misconception that a more costly golf club will fix your slice.

Step 2 – The Grip

The golf club grips can sometimes be a problematic or tricky thing. Although it’s not tough to constantly make a fidget with the grip, it is vital to focus on working with the basics of the grip. It gives you the chance of squaring up your clubface.

You will not find it fun while working on the grip, but it’s awfully important, to be honest.

When you neglect the fundamentals of this game, it will become much more difficult for you. And this is what no golfer wants to experience.

  • At first, grip the golf club using your left hand. At this point, you have to make sure that your golf club is sitting entirely between the fingers of your left hand.
  • While holding the golf club with your left hand, you should look down. If you see two knuckles, it means you are holding it right.
  • Always remember that the position of your land while holding your golf club is extremely important. If you can’t hold the club using your left hand following the right way, it won’t be possible to make the intended shot.
  • Your right thumb should make a V shape, and the forefinger must be pointed towards your shoulder.
  • If you are a beginner golfer, you can try the training grips to place your hands in the right place while holding your golf club.

Step 3 – Setup/Stance

If you ask an experienced golfer, you will come to know that the pro golfers constantly check their entire setup, ideally before the backswing.

  • If you are a right-handed golfer, you should position the golf ball at the inner side of your left foot.
  • Accurate ball position helps to hit the golf ball on the upswing.
  • While you hit a driver on the downswing, it can lead to a slice.
  • Accurate golf ball position also helps you to keep your shoulders properly aligned. This also helps in reducing the chance of causing a swing.
  • If your shoulders are not properly aligned, it becomes tough for you to square up the clubface. And the result is a slice.

Step 4 – Swing Path

Most of the beginner golfers happen to make a slice when the swing path direction is more outside-in than the inside-out. This is a bit tough to understand. Also, a drill is mandatory to explain the entire thing precisely.

  • One of the most effective drills to observe if your swing is on the right path is the towel-under-the-arm drill.
  • If you are the type of golfer who struggles much with a slice, you should start warm up with this drill every time you go out there in the green field.
  • Practicing this drill will help you get stronger backswings. Consequently, you will observe noticeable changes in your shots. And, your body will gradually learn to repeat this procedure.
  • Keep practicing hitting following this drill using irons, drivers, hybrids. And, eventually, you will learn to play the proper swing path.
  • If you are a right-handed golfer, make sure you place a soft towel under your right armpit.

Step 5 – Club Face

One of the most common mistakes made by almost all the slicers is that they tend to slow down the swing while intending to hit a proper shot.

Based on my golfing experience, I can tell you that whenever I tried to slow down the swing, I ended up with a terrible shot (something I don’t want to repeat in the future).

You can follow these tips to square up the clubface:

  • Double-check whether the grip is correct.
  • Make sure the entire setup is completely perfect.
  • Ensure that you have the proper equipment required for your desired swing.
  • While you complete the backswing and make a transition to the downswing, a minimum rotation of your forearms will make the clubface go from open-to-square-to-closed.
  • Many golfers try to swing drivers much faster compared to other golf clubs. If you are a beginner, you shouldn’t try this.
  • Don’t give up. Practice more, and eventually, you will taste the success.

Final Words

We have almost reached the end of our discussion on how to correct a slice with a driver.

By this time, you have come to know everything regarding how you can correct a slice using a driver. To help you with the most, I have divided the entire section into several steps. If you follow all the steps described above, you will gradually be able to correct a slice.

Always remember that it’s not possible to fix a slice overnight. All you need is patience and practice. Frankly speaking, I was sometimes really mad at me when I had no idea about how to fix a slice using a driver.

But, with correct information, practice, and patience, I finally corrected my slice with a driver. I hope my step by step guideline on fixing a slice with a driver will work for you as well.

Do let me know about your progress. I would love to hear out from my readers.

Still, if you have more questions on fixing a slice with a driver, you can comment below.

I always find it amusing to help my readers.

This is all that I had for you this time.

Take Care!

Leave a Comment

Your email address will not be published. Required fields are marked *